> For the complete documentation index, see [llms.txt](https://guide.lunarcheat.com/llms.txt). Markdown versions of documentation pages are available by appending `.md` to page URLs; this page is available as [Markdown](https://guide.lunarcheat.com/welcome/temporary-spoofer/temporary-spoofing/step-1-spoofing.md).

# Step 1: Spoofing

Temporary spoofing explanations.

<figure><img src="https://362318066-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FWJjt0MwHxGCh1DoC1w33%2Fuploads%2FsVCnGBJheWGvumFqHaTv%2Fimage.png?alt=media&amp;token=ca98e48a-5316-4110-9e6f-52f9936dce3c" alt="" width="563"><figcaption></figcaption></figure>

&#x20;                                                                       <sub>Lunar Temporary Spoofer</sub>

## **1. Open Loader as Administrator** <a href="#id-1.-open-loader-as-administrator" id="id-1.-open-loader-as-administrator"></a>

* Right-click the Loader application and select **"Run as administrator."**
* Enter your license key.

<figure><img src="https://362318066-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FWJjt0MwHxGCh1DoC1w33%2Fuploads%2FTYdSP297zqTTyeGET970%2Fimage.png?alt=media&amp;token=d3da633d-f91d-41f6-8e1c-1a6f85fa0c58" alt="" width="269"><figcaption></figcaption></figure>

&#x20;                                                                                         <sub>Login</sub>

## **2. Clean Traces** <a href="#id-2.-clean-traces" id="id-2.-clean-traces"></a>

* Press "Clean Traces"**,** and **Wait**.
* Wait for the process to complete; this may take a moment.
* Your PC will automatically restart.

{% hint style="info" %}
**CLEANER MIGHT NOT WORK ON YOUR PC / DELAY BAN**

Our cleaner works in most cases, but it **may not work** for everyone and could sometimes cause **delays bans**.

For the **best results**, we recommend **reinstalling Windows** and then running the temporary spoofer again to ensure a clean and safe setup.
{% endhint %}

### 3. Spoofing <a href="#id-3.-spoofing" id="id-3.-spoofing"></a>

* Press **Temporary Spoof,** and **Wait**.

<figure><img src="https://362318066-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FWJjt0MwHxGCh1DoC1w33%2Fuploads%2FnJEtm1F5wEtElLdAPU2Z%2Fimage.png?alt=media&amp;token=59da0e66-75a4-475e-abd2-32a27f423e41" alt="" width="563"><figcaption></figcaption></figure>

&#x20;                                                                                  <sub>Home Screen</sub>

* Press **Yes**, its going to setup the Spoofer.<br>

<figure><img src="https://362318066-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FWJjt0MwHxGCh1DoC1w33%2Fuploads%2F0b8QgEpuNUaqdHJUiziS%2Fimage.png?alt=media&amp;token=a17dc338-a52f-4852-aebf-91cb9cf99ebf" alt="" width="563"><figcaption></figcaption></figure>

&#x20;                                                                  <sub>Microsoft PDB Downloads</sub>

* Wait for the process to complete; this may take a moment.
* Check your serials, before and after!

### **BSODs /** Failed to Load Driver <a href="#bsods-failed-to-load-driver" id="bsods-failed-to-load-driver"></a>

1. Open the **Spoofer Loader**
2. Go to the **Misc** tab
3. Click **Refresh Spoofing Traces** to fix BSODs or serials not changing
4. If "Failed to Load Driver" issue persists, click **Failed to Load Driver Fix**
5. Restart your PC
6. After rebooting, attempt to spoof again, the issue should now be resolved

{% hint style="success" %}
**This fix addresses common driver load failures caused by missing permissions or HVCI.**
{% endhint %}